Micro-star-computer G31M Manual de usuario descargar pdf (Pagina 41)

3-7

BIOS Setup

Device / Vender / Size

It will showing the device information that you connected to the SATA connector.

LBA/Large Mode

This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA

mode if the device supports it and the devices is not already formatted with LBA

mode disabled.

DMA Mode

Select DMA Mode.

Hard Disk S.M.A.R.T.

This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting

Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your

disk status to predict hard disk failure. This gives you an opportunity to move

data from a hard disk that is going to fail to a safe place before the hard disk

becomes offline.

Important

IDE Primary Master/Slave and SATA 1/2/3/4 Channels are appearing

when you connect the HD devices to the IDE/ SATA connector on the

mainboard.

Floppy Druve A

This item allows you to set the type of floppy drives installed. Available options:

[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 115 116

Sin comentarios

Micro-star-computer G31M Manual de usuario Pagina 41